Epson XP-5100 Error 0x82E3
Title: Troubleshooting Epson XP-5100 Error Code 0x82E3: Insufficient Light Error
Content:
If you own an Epson XP-5100 printer and have encountered the error code 0x82E3 with the message “Insufficient Light” displayed on its screen, don’t worry! This article will guide you through the description and troubleshooting steps for this issue.
The error code 0x82E3 primarily occurs due to various reasons related to insufficient light. Here are the common causes and troubleshooting methods for this error:
1. Insufficient Electric Voltage for the PIS Sensor:
Ensure that your printer is connected to a stable power source. Unplug the printer from the power outlet and connect it to another reliable power source. Restart the printer to check if the error persists.
2. Break of the FFC (Flat Flexible Cable):
Inspect the FFC connecting the PIS sensor to the printer’s circuit board. If you find any visible damage or breakage, it may be causing the error. In this case, replace the FFC with a new one. Contact Epson customer support or a professional technician if needed.
3. Deterioration of the PIS Sensor:
Over time, the PIS sensor might deteriorate, leading to this error. Contact Epson customer support to determine if the sensor needs replacement. They will assist you in obtaining a compatible and genuine replacement.
4. Insufficient Reflected Light from the L/C:
Check if the light source is obstructed or misaligned. Clean the reflective surface of the L/C (light cartridge) carefully with a soft, lint-free cloth. Ensure that the L/C is properly placed and aligned inside the printer.
By following these troubleshooting steps, you should be able to resolve the Epson XP-5100 error code 0x82E3 related to insufficient light. In case the error persists, it is recommended to seek assistance from Epson customer support or a qualified printer technician to diagnose and fix the issue accurately.
| Printer Model | Epson XP-5100 |
| Error Code | 0x82E3 |
| Display On | PRINTER |
| Description and troubleshooting | Insufficient Light error. Electric voltage for the PIS sensor is insufficient. Break of the FFC. The PIS sensor has deteriorated. Reflected light from the l/C is insufficient. |
Key reset Epson XP-5100
– Epson XP-5100 Resetter For Windows: Download
– Epson XP-5100 Resetter For MAC: Download
Check Supported Functions For Epson XP-5100
If Epson XP-5100 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson XP-5100 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson XP-5100
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
