Epson ET-3750 Error 0x02C8
Epson ET-3750 Error Code 0x02C8: Troubleshooting and Description
If you own an Epson ET-3750 printer, encountering error code 0x02C8 can be frustrating. This error is displayed as “EJ2 load position excess speed error” and indicates a problem with the printer’s EJ2 motor encoder. Several factors can contribute to this error, and we will discuss them below.
One possible reason for the error is the contamination of the EJ2 encoder scale. Dust, dirt, or debris can accumulate on the scale, interfering with the accurate reading of the motor encoder. Regular cleaning of the encoder scale may help resolve this issue.
Another cause could be the skew or damage of the EJ2 encoder flexible flat cable (FFC). Check if the FFC is dislodged or damaged, as this can disrupt proper communication between the encoder and other printer components. Replacing or realigning the FFC may resolve the problem.
Failure of the EJ2 encoder sensor or motor driver is another potential cause. These components are responsible for accurate motor positioning and speed control. If either of them malfunctions, error code 0x02C8 may appear. In this case, seeking professional assistance for repair or replacement is recommended.
Lastly, a failure of the main board can also trigger this error. The main board controls various printer functions, including communication with the motor encoder. If the main board is faulty, it may not read the encoder data correctly, resulting in error code 0x02C8. Expert help may be needed to address this issue.
In conclusion, encountering error code 0x02C8 on your Epson ET-3750 printer means there is a problem with the EJ2 motor encoder. Possible causes include contamination of the encoder scale, damage to the encoder FFC, failure of the encoder sensor or motor driver, or a faulty main board. Addressing these issues through cleaning, replacement, or professional repair may resolve the error and restore normal printer functionality.
| Printer Model | Epson ET-3750 |
| Error Code | 0x02C8 |
| Display On | PRINTER |
| Description and troubleshooting | EJ2 load position excess speed error. Failed to read The EJ2 motor encoder. Contamination of The EJ2 encoder scale. Skew or damage of The EJ2 encoder FFC. Failure of The EJ2 encoder sensor Failure of The EJ2 motor driver. Failure of the main board. |
Key reset Epson ET-3750
– Epson ET-3750 Resetter For Windows: Download
– Epson ET-3750 Resetter For MAC: Download
Check Supported Functions For Epson ET-3750
If Epson ET-3750 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson ET-3750 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson ET-3750
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
