Epson PX700W Error 0x22
The Epson PX700W printer may encounter an error with the code 0x22 displayed on the screen, indicating a home position seeking error. This error occurs when the printer is unable to reach the desired position flag during the home seeking process. There are several possible causes for this error, including paper jams, paper feed errors, residual paper inside the printer, cable or FFC disconnections, and sensor errors.
If there is a paper jam, carefully remove the jammed paper from the printer. Make sure to check all possible areas where paper could get stuck, such as the paper tray, rear paper feed, and output tray. Clean any residual paper scraps that may be causing the obstruction.
If you are experiencing paper feed errors, ensure that the paper is loaded correctly in the paper tray. Adjust the paper guides to fit the size of the paper being used. Also, check for any obstructions in the paper feed path and clean them if necessary.
Residual paper inside the printer can also cause this error. Open the printer cover and check for any leftover paper scraps. Use a soft, lint-free cloth to gently remove any debris.
Check the cables and FFC (flat flexible cable) connections to ensure they are properly connected and secure. Reconnect any loose cables or FFCs if necessary.
Lastly, if the error persists, it may indicate a malfunctioning sensor. The front ASF home sensor (FP sensor), rear ASF phase sensor (RP sensor), or rear ASF home sensor (RH sensor) may need to be checked or replaced. It is recommended to contact Epson customer support for further assistance in troubleshooting and resolving these sensor errors.
By following these troubleshooting steps, you can address the Epson PX700W error code 0x22 and ensure the smooth functioning of your printer.
| Printer Model | Epson PX700W |
| Error Code | 0x22 |
| Display On | PRINTER |
| Description and troubleshooting | Home position seeking error. Cannot reach to a target position flag during home seeking. Paper jam. Paper feed error. Residual paper. Cable or FFC disconnection. Front ASF home sensor (FP sensor) error. Rear ASF phase sensor (RP sensor) error. Rear ASF home sensor (RH sensor) error. |
Key reset Epson PX700W
– Epson PX700W Resetter For Windows: Download
– Epson PX700W Resetter For MAC: Download
Check Supported Functions For Epson PX700W
If Epson PX700W In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson PX700W is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson PX700W
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
