Epson WorkForce-ST-2000 Error 0x0018
The Epson WorkForce-ST-2000 printer is a reliable and efficient device that guarantees high-quality printouts. However, like any electronic device, it may encounter technical issues that can disrupt your printing tasks. One such problem is the error code 0x0018, which is indicated on the printer’s display. This error message signifies the following problems that need to be addressed:
1. CR PID lock error: This error may occur due to a malfunction in the printer’s CR (carriage) PID lock mechanism. It is essential to check if there are any obstructions or foreign objects that may be causing the lock to fail. Clearing the obstruction or seeking professional assistance can help resolve the issue.
2. CR encoder failure: The CR encoder is responsible for determining the position of the print head. If it fails, it can lead to the error code 0x0018. Inspect the encoder strip and clean it if necessary. If the issue persists, contacting Epson support is advisable.
3. CR motor failure: The CR motor drives the carriage assembly. If this motor malfunctions, it can cause the printer to display the error code. Check for any physical damage or loose connections associated with the motor. Professional assistance may be required to fix or replace the faulty CR motor.
4. CR Mechanism overload: Excessive load on the carriage mechanism can trigger the error code on the printer’s display. This issue can occur due to a paper jam, obstruction, or misalignment. Carefully inspect and resolve any mechanical issues causing the overload to resolve the error.
5. Detached parts, cable or FFC disconnection: Sometimes, certain printer components may become detached or disconnected, leading to the error code 0x0018. Thoroughly inspect all connections, cables, and components to ensure they are securely attached.
6. Motor driver failure or main board failure: In rare cases, the error code 0x0018 may be caused by a motor driver or main board failure. Contact Epson support for assistance in diagnosing and resolving these issues.
When encountering the error code 0x0018 on your Epson WorkForce-ST-2000 printer, it is crucial to carefully follow the troubleshooting steps mentioned above. These steps can help identify and resolve the underlying issues, ensuring smooth and uninterrupted printing operations. If the problem persists, seeking professional assistance from Epson customer support is recommended for further guidance.
| Printer Model | Epson WorkForce-ST-2000 |
| Error Code | 0x0018 |
| Display On | PRINTER |
| Description and troubleshooting | CR PID lock error. CR encoder failure. CR motor failure. CR Mechanism overload. Some part may be detached. Cable or FFC disconnection. Motor driver failure. Main board failure. |
Key reset Epson WorkForce-ST-2000
– Epson WorkForce-ST-2000 Resetter For Windows: Download
– Epson WorkForce-ST-2000 Resetter For MAC: Download
Check Supported Functions For Epson WorkForce-ST-2000
If Epson WorkForce-ST-2000 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WorkForce-ST-2000 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WorkForce-ST-2000
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
