Epson L15180 Error 0x02C8
The Epson L15180 error code 0x02C8 is a common issue that users may encounter on their printers. This error is specifically related to the EJ2 load position excess speed error, indicating a problem with the printer’s EJ2 motor encoder. There are several potential causes for this error, including contamination of the EJ2 encoder scale, skew or damage of the EJ2 encoder FFC (Flexible Flat Cable), failure of the EJ2 encoder sensor, failure of the EJ2 motor, failure of the EJ2 motor driver, or even a failure of the main board.
To troubleshoot this error, there are a few steps that users can take. First, they should make sure that the printer is turned off and unplugged from the power source. Then, they can visually inspect the EJ2 encoder scale for any signs of contamination, such as dirt or debris. If necessary, they can carefully clean the encoder scale using a lint-free cloth and gentle cleaning solution.
Next, users can check the EJ2 encoder FFC for any signs of damage or skewing. If any issues are found, the FFC may need to be replaced.
If the above steps do not resolve the issue, it may be necessary to contact Epson support for further assistance. They can help diagnose the specific cause of the error and provide guidance on the best course of action, whether it be replacing a faulty component or repairing the main board.
In conclusion, the Epson L15180 error code 0x02C8 related to the EJ2 load position excess speed error can be caused by various factors, such as contamination, damage, or failure of different components. Troubleshooting steps include cleaning the encoder scale, inspecting and replacing the EJ2 encoder FFC if needed, or seeking professional support from Epson for further assistance.
| Printer Model | Epson L15180 |
| Error Code | 0x02C8 |
| Display On | PRINTER |
| Description and troubleshooting | EJ2 load position excess speed error. Failed to read The EJ2 motor encoder. Contamination of The EJ2 encoder scale. Skew or damage of The EJ2 encoder FFC. Failure of The EJ2 encoder sensor Failure of The EJ2 motasor Failure of The EJ2 motor driver. Failure of the main board. |
Key reset Epson L15180
– Epson L15180 Resetter For Windows: Download
– Epson L15180 Resetter For MAC: Download
Check Supported Functions For Epson L15180
If Epson L15180 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L15180 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L15180
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
