Epson WF-6590-6593 Error OxFA
The Epson WF-6590-6593 printer occasionally displays the error code OxFA. This error message typically indicates a problem with the PF load position, encoder, motor, mechanism, cable, or FFC connection. It can also suggest issues related to tooth skip or improper tension of the timing belt.
To troubleshoot this error, here are some steps you can follow:
1. First, check for any excessive load on the PF (Paper Feed) tray. Ensure that the paper is properly aligned and not overfilled. If necessary, remove some paper to reduce the load.
2. Next, inspect the encoder for any damages or misalignments. The encoder is a small plastic wheel located on the side of the printer’s paper tray. If it appears damaged, contact Epson customer support for further assistance.
3. If the error persists, it might indicate a PF motor failure. In this case, try disconnecting the printer from the power source for a few minutes and then plug it back in. This may reset the motor and resolve the issue.
4. Another potential cause is an overload in the PF mechanism. Gently move the print head assembly to check for any obstructions or jammed papers. Remove any debris carefully.
5. Inspect the cable and FFC (Flat Flexible Cable) connections, ensuring they are securely attached. If any disconnections or damages are found, consult a professional technician for repairs or replacements.
6. Lastly, inspect the timing belt tension and check for any skips or looseness. Adjust the tension if necessary, following the printer’s manual guidelines.
If the issue persists after following these troubleshooting steps, it is recommended to contact Epson customer support or seek assistance from an authorized service center to resolve the error code OxFA effectively.
| Printer Model | Epson WF-6590-6593 |
| Error Code | OxFA |
| Display On | PRINTER |
| Description and troubleshooting | PF LOAD POSITION excess load error. Encoder failure. PF motor failure. PF Mechanism overload. Cable or FFC disconnection. Tooth skip or improper tension of the timing belt. |
Key reset Epson WF-6590-6593
– Epson WF-6590-6593 Resetter For Windows: Download
– Epson WF-6590-6593 Resetter For MAC: Download
Check Supported Functions For Epson WF-6590-6593
If Epson WF-6590-6593 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WF-6590-6593 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WF-6590-6593
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
