Epson WF-5690-5691-5693 Error 0xE9
The Epson WF-5690-5691-5693 printers sometimes display the error code 0xE9, which indicates a problem with the CR load position. This error occurs when the CR (carriage) motor rotates at a higher speed than what is expected during the printing process. There are several potential causes for this error, including a CR encoder failure, tooth skip or improper tension of the timing belt, motor driver failure, or main board failure.
If you encounter the error code 0xE9 on your Epson printer, there are a few troubleshooting steps you can take. Firstly, try turning off the printer and disconnecting the power cord for a few minutes. Then, reconnect the power cord and turn the printer back on. This simple reset often resolves minor issues and can help clear the error.
If the error persists, check the CR encoder. Ensure that it is clean and free from any debris that could hinder its movement. You can also try reseating the timing belt to ensure proper tension. If there are any visible signs of damage or wear on the belt, it may need to be replaced.
If these steps do not resolve the error, it is possible that the motor driver or main board is faulty. At this point, it is recommended to contact Epson customer support or a professional printer technician for further assistance. They will be able to diagnose the specific issue and provide appropriate solutions or repairs.
Remember, it is always crucial to follow proper maintenance procedures and consult the printer manual for guidance. Regular cleaning and servicing can help prevent errors and ensure the longevity of your printer.
| Printer Model | Epson WF-5690-5691-5693 |
| Error Code | 0xE9 |
| Display On | PRINTER |
| Description and troubleshooting | CR LOAD POSITION excess speed error. The CR motor rotates faster than expected during printing. CR encoder failure. Tooth skip or improper tension of the timing belt. Motor driver failure. Main board failure. |
Key reset Epson WF-5690-5691-5693
– Epson WF-5690-5691-5693 Resetter For Windows: Download
– Epson WF-5690-5691-5693 Resetter For MAC: Download
Check Supported Functions For Epson WF-5690-5691-5693
If Epson WF-5690-5691-5693 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WF-5690-5691-5693 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WF-5690-5691-5693
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
