Epson Artisan 800 Error Code 0x88 Part 49509

Epson Artisan 800 Error 0x88

Epson Artisan 800 Error 0x88

The Epson Artisan 800 printer occasionally encounters the error code 0x88, which is displayed on the printer’s screen. This error indicates an excessive light issue, sensor failure, or a problem with the PIS board. It commonly occurs when the printer is used outdoors or near windows, and too much diffused light falls on the sensor.

Excessive light can interfere with the printer’s functionality, leading to error code 0x88. When using the printer outdoors or near windows, it is important to ensure that the sensor is not exposed to excessive light. This issue can disrupt the printing process and prevent the printer from functioning effectively.

To troubleshoot this error, consider the following steps:

1. Relocate: Move the printer to an area with less exposure to natural light, or away from windows if possible. This helps to minimize the excess light falling on the sensor.

2. Light control: Use curtains or blinds to control the amount of light entering the room. This can reduce the intensity of diffused light that can affect the printer’s sensor.

3. Sensor inspection: Check the printer’s sensor for any physical damage or obstructions. Clean the sensor using a soft, lint-free cloth to ensure it is free from dust or debris.

4. Power cycle: Turn off the printer, unplug it from the power source, and wait for a few minutes. Then, reconnect it and power it back on. This simple restart may resolve the error code 0x88.

If these troubleshooting steps do not resolve the issue, it is recommended to contact Epson customer support for further assistance. They can provide tailored solutions or suggest professional servicing options to rectify the excessive light error and restore the printer’s functionality.

# You are scrutinizing Fix Epson Artisan 800 Error 0x88 at za.chiplessprinter.com
Printer Model Epson Artisan 800
Error Code 0x88
Display On PRINTER
Description and troubleshooting Excessive light error. Sensor failure. PIS board failure. Too much diffused light from outside is shed on the sensor when used outdoors or near the windows.
| Access the next chapter of the book: https://za.chiplessprinter.com/epson-wf-110-error-code-0x0006-part-54/

Key reset Epson Artisan 800

– Epson Artisan 800 Resetter For Windows: Download
– Epson Artisan 800 Resetter For MAC: Download

Check Supported Functions For Epson Artisan 800

If Epson Artisan 800 In Supported List

Get Wicreset Key

Epson Artisan 800 Wicreset Key

– After checking the functions that can be supported by the Wicreset software, if Epson Artisan 800 is supported, we will reset the waste ink as shown in the video below:

Contact Support For Epson Artisan 800

Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

Share This Post

Post Comment