Epson EC-C7000 Error 0x0098
Epson EC-C7000 Error Code 0x0098 Explained and Troubleshooting Tips
If you own an Epson EC-C7000 printer and have come across error code 0x0098 with the message “STK load position excess speed error. Failed to read the Stacker motor encoder,” do not worry! In this article, we will provide an overview of this error and guide you through some troubleshooting steps to resolve the issue.
The error code 0x0098 on the Epson EC-C7000 printer indicates a problem with the Stacker motor encoder. There are several possible causes for this error, including contamination of the Stacker motor encoder scale, a damaged FFC (flat flexible cable), encoder sensor failure, failure of the Stacker motor driver, or even a failure of the main board.
To troubleshoot this error, start by checking the Stacker motor encoder scale. It may have accumulated dust or debris, leading to inaccurate readings. Carefully clean the encoder scale using a lint-free cloth or compressed air. Be cautious not to damage or scratch it during the cleaning process.
Next, inspect the FFC for any visible damage. If you notice any tear or break in the cable, it may need to be replaced. Contact Epson customer support or a professional technician to acquire a new FFC and assist with the replacement process.
If cleaning the encoder scale and replacing the FFC do not resolve the issue, it is possible that either the encoder sensor or the Stacker motor driver has malfunctioned. In such cases, it is recommended to contact a qualified technician for further assistance. They will be able to diagnose the problem accurately and suggest appropriate solutions, including the repair or replacement of these components if necessary.
In rare cases, the error may be related to a failure of the main board. If none of the above troubleshooting steps yield positive results, it is advisable to contact Epson customer support or a certified technician for further guidance.
Remember, the information provided here is intended as a general guide. Always refer to the manufacturer’s manual or seek professional assistance whenever needed.
In conclusion, encountering error code 0x0098 on your Epson EC-C7000 printer due to Stacker motor encoder issues can be resolved through proper troubleshooting measures. By following the steps outlined above, you can effectively resolve this error and get your printer back up and running smoothly.
| Printer Model | Epson EC-C7000 |
| Error Code | 0x0098 |
| Display On | PRINTER |
| Description and troubleshooting | STK load position excess speed error. Failed to read the Stacker motor encoder. Contamination of the Stacker motor encoder scale. Damaged FFC. Encoder sensor failure. Failure of the Stacker motor driver. Failure of the main board. |
Key reset Epson EC-C7000
– Epson EC-C7000 Resetter For Windows: Download
– Epson EC-C7000 Resetter For MAC: Download
Check Supported Functions For Epson EC-C7000
If Epson EC-C7000 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson EC-C7000 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson EC-C7000
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
