Epson ET-2760 Error 0x003D
When encountering the Epson ET-2760 Error code 0x003D with the display of “ASF (1st) PID excess load error” on your printer, it indicates that the ASF (1st) motor has stopped running during a printing task. This error can occur due to various reasons, including a paper jam, mechanism overload, broken gear, encoder error, contaminated encoder scale, disconnected or broken FFC, encoder sensor failure, motor failure, or even a main board failure.
To troubleshoot this error, start by checking for any paper jams in the printer. Gently remove any stuck paper to ensure smooth operation. If the problem persists, inspect the printer’s mechanism for overload or damaged gears. Replace any broken gears if necessary.
Next, check the encoder scale for any dust or contamination. Clean it carefully using a lint-free cloth or compressed air. Ensure that the FFC (Flat Flexible Cable) is properly connected and intact. If it is damaged, consider replacing it.
If the error continues, it might indicate a failure of the encoder sensor or motor. In such cases, it is advisable to seek professional assistance or contact Epson support for further guidance.
In rare instances, the main board of the printer could be the culprit behind this error. If none of the above troubleshooting steps resolve the issue, it may be necessary to replace the main board.
Remember, it is always recommended to follow proper maintenance and handling procedures for your printer to prevent these types of errors. Regularly clean the printer, use compatible and high-quality paper, and ensure that the printer is updated with the latest firmware to enhance its performance and minimize the occurrence of errors.
| Printer Model | Epson ET-2760 |
| Error Code | 0x003D |
| Display On | PRINTER |
| Description and troubleshooting | ASF (1st) PID excess load error. The ASF (1st) motor stopped running in the middle of the operation. Paper jam. Mechanism overload. Broken gear. Encoder error. Contaminated encoder scale. Disconnected or broken FFC. Encoder sensor failure. Motor failure. Main board failure. |
Key reset Epson ET-2760
– Epson ET-2760 Resetter For Windows: Download
– Epson ET-2760 Resetter For MAC: Download
Check Supported Functions For Epson ET-2760
If Epson ET-2760 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson ET-2760 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson ET-2760
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
