Epson ET-7700 Error 0x01F8
If you encounter an Epson ET-7700 printer displaying the error code 0x01F8 with the caption “CAP PID lock error,” it signifies an issue with the printer’s CAP (Cleaning Assembly Pressure) PID (Proportional Integral Derivative) lock mechanism. Rest assured, this guide will provide valuable troubleshooting steps to resolve the problem.
Firstly, begin by turning off the printer and unplugging it from the power source. After a few minutes, plug it back in and turn it on again. This simple reboot may rectify the error.
Next, inspect the printer for any visible obstructions that might be hindering the movement of the CAP assembly. Clear away any debris, such as paper bits or foreign objects, and ensure that the CAP assembly moves freely.
If the error persists, it is advisable to remove the ink cartridges carefully and check for any damage or abnormalities. Replace any defective cartridges or clean the nozzles if needed.
In certain cases, a firmware update may address the error code 0x01F8. Visit the Epson support website and locate the drivers and downloads section for your printer model. Follow the provided instructions to download and install the latest firmware update.
If all the above steps fail to resolve the error, it is recommended to contact Epson customer support or a certified technician for assistance. Provide them with the specific error code and description to facilitate a quicker and accurate resolution.
Remember, troubleshooting steps may vary depending on the printer model and other factors. For a more comprehensive and personalized solution, it is always wise to consult the official documentation or seek professional help.
| Printer Model | Epson ET-7700 |
| Error Code | 0x01F8 |
| Display On | PRINTER |
| Description and troubleshooting | CAP PID lock error. |
Key reset Epson ET-7700
– Epson ET-7700 Resetter For Windows: Download
– Epson ET-7700 Resetter For MAC: Download
Check Supported Functions For Epson ET-7700
If Epson ET-7700 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson ET-7700 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson ET-7700
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
