Epson L4150-L4156-L4158 Error 0x02C0
The Epson L4150-L4156-L4158 printer may encounter error code 0x02C0 displayed on the printer, which indicates an EJ2 PID lock error. This error occurs when the EJ2 motor fails to run or when there are obstacles present in the paper path. It can also be caused by an overload of the paper feed mechanism.
The error can be further attributed to a frayed or jumping EJ2 timing belt, disengaged wheel train of the paper feed mechanism, or a broken tooth in the mechanism. Additionally, the error could occur due to a failed reading of the EJ2 motor encoder or contamination of the EJ2 encoder scale. Disconnection, breakage, skewing, or damage of the EJ2 encoder FFC can also lead to this error. Lastly, a failure of the EJ2 encoder sensor, EJ2 motor (broken lead wire or disconnected connector), or the main board can cause error code 0x02C0.
To troubleshoot this error, first, check if any obstacles are present in the paper path and remove them if found. Inspect the EJ2 timing belt for any frays or jumps and replace if necessary. Ensure that the wheel train of the paper feed mechanism is engaged correctly and that none of the teeth are broken. Clean the EJ2 encoder scale if contamination is suspected. Verify the connection and condition of the EJ2 encoder FFC. If the issue persists, replace the EJ2 encoder sensor, EJ2 motor, or the main board if any of them are found to be defective.
By following these troubleshooting steps, you can resolve the error code 0x02C0 related to the Epson L4150-L4156-L4158 printer’s EJ2 PID lock error.
| Printer Model | Epson L4150-L4156-L4158 |
| Error Code | 0x02C0 |
| Display On | PRINTER |
| Description and troubleshooting | EJ2 PID lock error. The EJ2 motor did not run or obstacles exist in the paper path. Overload of the paper feed mechanism. The EJ2 timing belt become frayed, jumping, or the wheel train of paper feed mechanism is disengaged or its tooth is broken Failed to read The EJ2 motor encoder. Contamination of The EJ2 encoder scale. Disconnection, break, skew or damage of The EJ2 encoder FFC. Failure of The EJ2 encoder sensor. Failure of The EJ2 motor (the lead wire is broken or the connector is disconnected). Failure of the main board. |
Key reset Epson L4150-L4156-L4158
– Epson L4150-L4156-L4158 Resetter For Windows: Download
– Epson L4150-L4156-L4158 Resetter For MAC: Download
Check Supported Functions For Epson L4150-L4156-L4158
If Epson L4150-L4156-L4158 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L4150-L4156-L4158 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L4150-L4156-L4158
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
