Epson WP-M4095 Error OxCC
Epson WP-M4095: Troubleshooting Error Code OxCC Displayed on Printer
If you are encountering the error code OxCC on your Epson WP-M4095 printer, it indicates an ink device error. This error can be caused by various issues, such as ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable/FFC disconnection. To resolve this error and get your printer back to functioning properly, follow the troubleshooting steps below.
Firstly, ensure that the ink cartridges are installed correctly. Remove and reinsert them to make sure they are properly seated in their designated slots. If the issue persists, try replacing the ink cartridges with new ones to eliminate the possibility of a faulty cartridge.
If the ink cartridges are not the cause of the error, it is recommended to check the holder board assembly. Ensure that the CSIC (contact image sensor chip) is clean and securely connected. Clean the contacts using a lint-free cloth or alcohol wipe to remove any dirt or residue that might be interfering with the connection.
In case the holder board assembly is not the culprit, the error could be related to a main board failure. In such a scenario, it is advised to contact Epson customer support or a qualified technician for further assistance. They will be able to diagnose and repair any issues with the main board effectively.
Lastly, if none of the above solutions resolve the error, inspect the cables and FFC (Flexible Flat Cable) connections. Check for any loose or disconnected cables and reconnect them firmly. Ensure there are no visible signs of damage to the cables or FFC.
By following these troubleshooting steps, you should be able to identify and resolve the OxCC error on your Epson WP-M4095 printer. However, if the error persists, it is advisable to seek professional assistance to avoid any further damage to your printer.
| Printer Model | Epson WP-M4095 |
| Error Code | OxCC |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson WP-M4095
– Epson WP-M4095 Resetter For Windows: Download
– Epson WP-M4095 Resetter For MAC: Download
Check Supported Functions For Epson WP-M4095
If Epson WP-M4095 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WP-M4095 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WP-M4095
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
