Epson L566 Error OxC5
Epson L566 Error Code OxC5 Quick Guide: Ink Device Error, Ink Cartridge Failure, Holder Board Assy Failure (CSIC or Contact Failure), Main Board Failure, Cable or FFC Disconnection.
If you are encountering Error Code OxC5 on your Epson L566 printer, it typically indicates an ink device error. This error message may occur due to various reasons, including ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable or FFC (Flat Flexible Cable) disconnection.
To resolve this error, follow the troubleshooting steps provided below:
1. Start by checking the ink cartridges. Ensure they are properly installed and seated securely in their respective slots. If any of the cartridges are low on ink, replace them.
2. If the ink cartridges appear to be fine, inspect the holder board assembly. Make sure the CSIC (Cartridge Status Information Chip) is clean and free from any obstructions. Also, check for any loose contacts or visible damage. If necessary, clean the contacts gently using a soft, lint-free cloth.
3. In case the issue persists, there might be a problem with the main board. To troubleshoot this, turn off the printer and disconnect all cables from the printer, including the power cord. Leave it disconnected for a few minutes, then reconnect everything and turn the printer on again. If the error persists, you may need to consult a professional technician for further assistance.
4. Lastly, verify the cable connections. Ensure that all cables and FFCs are securely connected to their respective ports. If you find any loose or disconnected cables, reconnect them properly.
If none of the above steps resolve the issue, it is advisable to reach out to Epson customer support or a qualified printer technician for further guidance and assistance.
| Printer Model | Epson L566 |
| Error Code | OxC5 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson L566
– Epson L566 Resetter For Windows: Download
– Epson L566 Resetter For MAC: Download
Check Supported Functions For Epson L566
If Epson L566 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L566 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L566
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
