Epson XP-5101 Error 0x0071
Epson XP-5101 Error Code 0x0071 Display on PRINTER: Description and Troubleshooting
If you encounter the error message “0x0071” on your Epson XP-5101 printer, it indicates an I/S Load Position Reverse Error. This error occurs when the operation of the I/S (Ink System) motor fails, resulting in the ink system being stopped. Several possible causes can lead to this error, including a mechanism overload, broken gear, encoder failure, contaminated encoder scale, disconnected or broken FFC (Flexible Flat Cable), encoder sensor failure, or even a main board failure.
To effectively troubleshoot and resolve this error, follow these steps:
1. Check for any visible obstructions or paper jams in the printer mechanism. Remove any stuck paper or debris that may be causing the overload.
2. Inspect the gears within the printer for any signs of damage or breakage. If any gears are broken, you will need to replace them.
3. Examine the encoder and its scale for any contamination. If there is dust or ink residue on the encoder scale, clean it carefully using a lint-free cloth and isopropyl alcohol.
4. Verify that the FFC, which connects various components to the main board, is firmly connected and undamaged. Replace it if necessary.
5. Test the encoder sensor for any malfunctions. If the sensor is faulty, it may need to be replaced.
6. If none of the above steps resolve the issue, it is possible that a main board failure has occurred. In this case, you should contact Epson customer support or a qualified technician for further assistance and potential board replacement.
By following these troubleshooting steps, you can address the Error Code 0x0071 and restore the functioning of your Epson XP-5101 printer.
| Printer Model | Epson XP-5101 |
| Error Code | 0x0071 |
| Display On | PRINTER |
| Description and troubleshooting | I/S LOAD POSITION reverse error. Operation failure of the I/S motor. The ink system was stopped. Mechanism overload. Broken gear. Encoder failure. Contaminated encoder scale. Disconnected or broken FFC. Encoder sensor failure. Main board failure. |
Key reset Epson XP-5101
– Epson XP-5101 Resetter For Windows: Download
– Epson XP-5101 Resetter For MAC: Download
Check Supported Functions For Epson XP-5101
If Epson XP-5101 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson XP-5101 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson XP-5101
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
