Epson L6160-L6161-L6168 Error 0x02BF
The Epson L6160-L6161-L6168 printer may display error code 0x02BF, indicating an issue with the EJ2 PID reverse. This error typically occurs when the paper feed mechanism fails to function due to various obstacles.
One common cause of this error is a paper jam, where the paper becomes stuck and prevents the printer from feeding it properly. Another possible cause is an overload of the paper feed mechanism, which can occur when too much paper is placed in the tray. Additionally, the wheel train of the paper feed mechanism may become disengaged or experience tooth breakage, resulting in the error message.
Another potential cause is a failure to read the EJ2 motor encoder, which is responsible for controlling the paper feed mechanism. This can occur if there is a problem with the encoder or its associated components, such as the timing belt, encoder scale, or encoder FFC.
The error code may also be caused by a skew or damage to the EJ2 encoder, which can affect its ability to accurately read the paper feed. Lastly, a failure of the main board can also lead to this error message.
To troubleshoot this error, start by checking for any paper jams or obstructions in the paper feed path. If a jam is detected, carefully remove the jammed paper. Next, ensure that the paper tray is not overloaded and that the wheel train of the paper feed mechanism is properly engaged.
If the issue persists, it may be necessary to clean or replace the EJ2 motor encoder, encoder scale, or encoder FFC. If these components are damaged, they should be replaced by a qualified technician. Additionally, if the main board is suspected to be faulty, it may need to be replaced or repaired.
In conclusion, error code 0x02BF on the Epson L6160-L6161-L6168 printer indicates an issue with the EJ2 PID reverse, commonly caused by obstacles in the paper feed mechanism or failures of the associated components. By following the troubleshooting steps outlined above, you can address the issue and get your printer back in working order. However, if the problem persists, it is advisable to seek professional assistance for repairs.
| Printer Model | Epson L6160-L6161-L6168 |
| Error Code | 0x02BF |
| Display On | PRINTER |
| Description and troubleshooting | EJ2 PID reverse error. Paper feed fails, stopped by obstacles. Paper feed was stopped by Obstacles such as jammed paper Overload of the paper feed mechanism Disengaging or tooth breakage of wheel train of the paper feed mechanism Failed to read The EJ2 motor encoder. Jumping of The EJ2 timing belt. Contamination of The EJ2 encoder scale. Skew or damage of The EJ2 encoder FFC. Failure of The EJ2 encoder sensor. Failure of the main board. |
Key reset Epson L6160-L6161-L6168
– Epson L6160-L6161-L6168 Resetter For Windows: Download
– Epson L6160-L6161-L6168 Resetter For MAC: Download
Check Supported Functions For Epson L6160-L6161-L6168
If Epson L6160-L6161-L6168 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L6160-L6161-L6168 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L6160-L6161-L6168
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
