Epson L132 Error 0xB5
Epson L132 Error Code 0xB5: Ink Device Error Detected on Printer
If you encounter the Epson L132 Error Code 0xB5 with a display on your printer, it indicates an ink device error. This error message can be caused by various factors such as ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable or FFC disconnection.
Firstly, ensure that your ink cartridges are properly installed and seated correctly in their designated slots. Remove them carefully and reinsert them, making sure they fit securely. If the error persists, try cleaning the cartridge contacts, as dust or dirt accumulation can hinder proper communication between the printer and cartridges.
In some cases, the holder board assembly may be the culprit behind the error. This assembly contains the CSIC (ink cartridge chip) which acts as a communication interface between the printer and ink cartridges. Make sure the CSIC is clean and not damaged. Gently wipe it with a lint-free cloth, if required. However, if the issue remains unresolved, it is best to contact Epson support for further assistance or to replace the faulty holder board assembly.
A main board failure is a possible cause of the error as well. In such cases, it is vital to contact Epson customer support to have the main board inspected and replaced, if necessary.
Lastly, check for any loose connections or disconnections between cables or FFC (flexible flat cables). Ensure all cables are securely attached and correctly connected to their respective ports.
By following these troubleshooting steps, you may be able to identify and resolve the Epson L132 Error Code 0xB5 on your printer. However, if the error persists or you are unsure about performing any of the mentioned steps, it is recommended to reach out to Epson support for expert guidance.
| Printer Model | Epson L132 |
| Error Code | 0xB5 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson L132
– Epson L132 Resetter For Windows: Download
– Epson L132 Resetter For MAC: Download
Check Supported Functions For Epson L132
If Epson L132 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L132 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L132
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
