Epson L3118-L3119 Error 0x02BD
The Epson L3118-L3119 printer may display error code 0x02BD, indicating an issue with the EJ2 motor. This error occurs when the motor stops running during operation. Several factors can cause this error, including obstacles such as jammed paper, overload of the paper feed mechanism, or disengaging and breakage of the gears.
Another possible cause is a failure to read the EJ2 motor encoder. This could happen if the timing belt becomes frayed or jumps, or if there is contamination on the EJ2 encoder scale. Additionally, the error could be due to disconnection, breakage, skewing, or damage of the EJ2 motor cable or encoder FFC.
In some cases, the EJ2 motor may not be completely broken but fails to function properly. Lastly, a failure of the main board could also result in this error code being displayed.
To troubleshoot this issue, you should first check for any obstructions such as jammed paper and remove them. Ensure that the paper feed mechanism is not overloaded and that the gears are functioning correctly. Clean the EJ2 encoder scale to eliminate any contamination and check the integrity of the EJ2 motor cable and encoder FFC for any damage.
If these steps do not resolve the error, you may need to replace the EJ2 motor or the main board if it is found to be faulty. It is recommended to consult with a professional or Epson service center for further assistance in diagnosing and resolving the specific issue with your printer.
| Printer Model | Epson L3118-L3119 |
| Error Code | 0x02BD |
| Display On | PRINTER |
| Description and troubleshooting | EJ2 PID excess load error. The EJ2 motor stopped running in the middle of the operation. The EJ2 was stopped by Obstacles such as jammed paper Overload of the paper feed mechanism Disengaging or breakage of the gears. Failed to read The EJ2 motor encoder. The timing belt become frayed or jumping. Contamination of The EJ2 encoder scale. Disconnection, break, skew or damage of The EJ2 motor cable/encoder FFC. Failure of The EJ2 motor (not completely broken). Failure of the main board. |
Key reset Epson L3118-L3119
– Epson L3118-L3119 Resetter For Windows: Download
– Epson L3118-L3119 Resetter For MAC: Download
Check Supported Functions For Epson L3118-L3119
If Epson L3118-L3119 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L3118-L3119 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L3118-L3119
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
