Epson L382 Error 0x02C8
The Epson L382 printer may occasionally encounter an error code 0x02C8, which displays as “EJ2 load position excess speed error.” This error signifies that the printer has failed to read the EJ2 motor encoder properly. There could be several reasons behind this issue.
One possible cause is contamination of the EJ2 encoder scale. Dust, debris, or ink residue can accumulate on the scale, hindering the printer’s ability to read it accurately. Another potential factor is the skew or damage of the EJ2 encoder FFC (Flexible Flat Cable), which connects the motor encoder to the printer’s main board. If this cable is bent or damaged, it can disrupt the communication between the encoder and the board.
Additionally, the EJ2 encoder sensor may malfunction, causing the error code to appear. This sensor plays a crucial role in detecting the position of the motor encoder. A faulty EJ2 motor driver can also contribute to this error. The motor driver controls the speed and movement of the motor, and if it fails, the printer may encounter communication issues with the encoder.
Lastly, a failure of the main board can also trigger the error code 0x02C8. The main board is responsible for coordinating the printer’s various components and functions. If this board malfunctions, it can affect the overall performance of the printer, including the reading of the EJ2 motor encoder.
To troubleshoot this error, it is recommended to first clean the EJ2 encoder scale using a soft, lint-free cloth. If the issue persists, carefully inspect the EJ2 encoder FFC for any damage or misalignment. Replacing the FFC may be necessary in such cases. If none of these solutions work, it is advisable to seek professional assistance from an authorized Epson service center to address the potential issues with the motor driver or main board.
| Printer Model | Epson L382 |
| Error Code | 0x02C8 |
| Display On | PRINTER |
| Description and troubleshooting | EJ2 load position excess speed error. Failed to read The EJ2 motor encoder. Contamination of The EJ2 encoder scale. Skew or damage of The EJ2 encoder FFC. Failure of The EJ2 encoder sensor Failure of The EJ2 motor driver. Failure of the main board. |
Key reset Epson L382
– Epson L382 Resetter For Windows: Download
– Epson L382 Resetter For MAC: Download
Check Supported Functions For Epson L382
If Epson L382 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L382 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L382
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
