Epson L382 Error 0x86C4
The Epson L382 printer is equipped with an error code 0x86C4, indicating a display issue on the printer. This error message specifically refers to a problem with the detection of the ink cartridge replacement timing contact. When the cartridge is not securely installed, it may come in contact with the housing, leading to this error.
The occurrence of this error is quite common, but there’s no need to worry. We have provided some troubleshooting steps to help you resolve the issue:
1. Turn off the printer and unplug it from the power source.
2. Open the printer cover and carefully remove the ink cartridges.
3. Inspect the cartridges for any visible damage or misalignment. Ensure that they are properly installed and securely seated in their respective slots.
4. Clean the contact points on both the cartridges and the printer using a clean, lint-free cloth.
5. Reinstall the cartridges into their correct positions and close the printer cover properly.
6. Connect the printer back to the power source and turn it on.
7. Check if the error message still appears. If it does, try reinstalling the cartridges again, making sure they are firmly in place.
8. If the error persists, it might be worth considering replacing the ink cartridges with new ones, as the current ones could potentially be defective.
By following these troubleshooting steps, you should be able to address the ink cartridge replacement timing contact detection error (error code 0x86C4) on your Epson L382 printer. However, if the issue continues to persist, we recommend contacting Epson customer support for further assistance.
| Printer Model | Epson L382 |
| Error Code | 0x86C4 |
| Display On | PRINTER |
| Description and troubleshooting | Ink cartridge replacement timing contact detection error. Cartridge comes in contact with the housing because it is not securely installed. |
Key reset Epson L382
– Epson L382 Resetter For Windows: Download
– Epson L382 Resetter For MAC: Download
Check Supported Functions For Epson L382
If Epson L382 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L382 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L382
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
