Epson L6160-L6161-L6168 Error 0x003D
The Epson L6160-L6161-L6168 printers may sometimes display the error code 0x003D, indicating an ASF (1st) PID excess load error. This error occurs when the ASF (1st) motor stops running during a print operation. There can be several causes for this error, including paper jams, mechanism overload, broken gears, encoder errors, contaminated encoder scale, disconnected or broken FFC, encoder sensor failure, motor failure, or even main board failure.
One of the common causes is a paper jam, where a piece of paper gets stuck in the printer’s mechanism. This can lead to excessive load on the motor, causing it to stop running. In such cases, it is important to carefully remove the jammed paper from the printer to restore its proper functioning.
Mechanism overload and broken gears can also cause the motor to stop. In this case, it becomes essential to inspect the printer’s internal components for any broken or damaged gears. Replacing these faulty gears can help resolve the issue.
Another possible cause is an encoder error or a contaminated encoder scale. The encoder scale is responsible for detecting the position of the printer’s carriage. If it is contaminated or the encoder is faulty, the motor may not function properly. Cleaning the encoder scale and ensuring its proper alignment can help alleviate this problem.
If the FFC (Flat Flexible Cable) connecting the encoder sensor to the main board is disconnected or broken, the motor may fail to run. Reconnecting or replacing the FFC can resolve this issue.
However, if these troubleshooting steps do not resolve the error, it may indicate a motor or main board failure. In such cases, it is recommended to contact Epson customer support or a qualified technician for further assistance and possible repairs.
| Printer Model | Epson L6160-L6161-L6168 |
| Error Code | 0x003D |
| Display On | PRINTER |
| Description and troubleshooting | ASF (1st) PID excess load error. The ASF (1st) motor stopped running in the middle of the operation. Paper jam. Mechanism overload. Broken gear. Encoder error. Contaminated encoder scale. Disconnected or broken FFC. Encoder sensor failure. Motor failure. Main board failure. |
Key reset Epson L6160-L6161-L6168
– Epson L6160-L6161-L6168 Resetter For Windows: Download
– Epson L6160-L6161-L6168 Resetter For MAC: Download
Check Supported Functions For Epson L6160-L6161-L6168
If Epson L6160-L6161-L6168 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L6160-L6161-L6168 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L6160-L6161-L6168
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
