Epson L6570 Error 0x02AC
The Epson L6570 printer may encounter an error code 0x02AC with the message “RASF PID lock error” displayed on the screen. This error typically indicates a problem with the RASF motor, causing it not to run properly. There are several possible causes for this error, including overload of the mechanism, disengaging or breakage of gears, failure to read the RASF encoder, contamination of the RASF encoder scale, break, skew or damage of the RASF motor cable or encoder FFC, failure of the RASF encoder sensor, failure of the RASF motor, or failure of the main board.
To troubleshoot this issue, you can try the following steps. Firstly, check for any visible damage or disconnection in the motor cable or encoder FFC. If any issues are found, reconnect or replace the damaged parts. Additionally, inspect the gears for any breakage or disengagement. If necessary, repair or replace the affected gears.
Next, clean the RASF encoder and scale to remove any contamination that might be interfering with its reading. Be sure to use a soft, lint-free cloth and be careful not to damage the encoder scale.
If the problem persists, it may be necessary to replace the RASF encoder sensor or the entire RASF motor. In more severe cases, the main board may need to be replaced.
If you are unsure about any of these troubleshooting steps or if the issue persists after attempting them, it is recommended to contact Epson customer support or a qualified service technician for further assistance. They will be able to provide more specific guidance based on the printer model and the exact error code encountered.
| Printer Model | Epson L6570 |
| Error Code | 0x02AC |
| Display On | PRINTER |
| Description and troubleshooting | RASF PID lock error. The RASF motor did not run. Overload of the mechanism. Disengaging or breakage of the gears. Failed to read the RASF encoder. Contamination of the RASF encoder scale. Break, skew or damage of the RASF motor cable/encoder FFC. Failure of the RASF encoder sensor. Failure of the RASF motor (the lead wire is broken or the connector is disconnected). Failure of the main board. |
Key reset Epson L6570
– Epson L6570 Resetter For Windows: Download
– Epson L6570 Resetter For MAC: Download
Check Supported Functions For Epson L6570
If Epson L6570 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson L6570 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson L6570
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
