Epson ME302-ME303 Error 0xB2
The Epson ME302-ME303 printer sometimes displays an error code 0xB2, which indicates an ink device error. This error can be caused by various issues, such as ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable or FFC disconnection.
Ink cartridge failure is a common reason for this error. It might occur if the ink cartridges are not properly installed or if they have been refilled with low-quality or incompatible ink. In such cases, it is recommended to remove the ink cartridges, check them for any damage, and ensure they are securely inserted into the printer. If necessary, replace the cartridges with genuine Epson ones.
Holder board assembly failure refers to a problem with the CSIC (Cartridge Status Information Chip) or its contact. This can occur if the chip is damaged or if there is a poor connection between the chip and the printer. To troubleshoot this issue, it is advisable to clean the contacts on both the CSIC and the printer and ensure they are firmly connected. If the problem persists, it may be necessary to replace the CSIC or contact a professional technician for assistance.
Main board failure or cable/FFC disconnection are less common causes of the error code. If these issues are suspected, it is recommended to check all connections, cables, and Flexible Flat Cables (FFCs) related to the printer. Ensure that they are properly connected and not damaged. If any cables or FFCs are found to be faulty, they should be replaced.
Overall, error code 0xB2 on the Epson ME302-ME303 printer most commonly indicates an ink device error or cartridge failure. By following the troubleshooting steps mentioned above, users can often resolve this issue and get their printer back to normal functioning.
| Printer Model | Epson ME302-ME303 |
| Error Code | 0xB2 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson ME302-ME303
– Epson ME302-ME303 Resetter For Windows: Download
– Epson ME302-ME303 Resetter For MAC: Download
Check Supported Functions For Epson ME302-ME303
If Epson ME302-ME303 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson ME302-ME303 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson ME302-ME303
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
