Epson PM-A840 Error 0x0 B
Epson PM-A840 Error code 0x0 B Display on PRINTER: Description and Troubleshooting
When encountering the Epson PM-A840 error code 0x0 B display on your printer, it denotes a CR LOAD POSITION excess speed error. This error occurs when the CR motor rotates at a faster speed than expected during printing. There are several potential causes for this issue, including CR encoder failure, tooth skip or improper tension of the timing belt, motor driver failure, or even main board failure.
Firstly, a CR encoder failure could be the underlying reason for the error. The encoder is responsible for keeping track of the motor’s rotation and position, so if it becomes defective or malfunctions, it can lead to the excessive rotation speed.
Another possible cause is a tooth skip or improper tension of the timing belt. If the belt slips or is not adequately tightened, the motor may rotate at an irregular and faster pace than intended, triggering the error code.
Motor driver failure is another factor to consider. If the motor driver, which controls the speed and power of the motor, malfunctions, it can lead to unexpected increases in speed, resulting in the excess speed error.
Lastly, a main board failure could also be responsible for the problem. The main board is the central component that coordinates and controls the printer’s various functions. If it fails to regulate the motor’s speed correctly, it could cause the error code to appear.
To troubleshoot this issue, it is recommended to check the CR encoder and ensure it is functioning correctly. Inspect the timing belt for any signs of damage or improper tensioning. If necessary, replace the belt or adjust the tension accordingly. Additionally, verify if the motor driver is working correctly and consider replacing it if found faulty. If all else fails, consult a professional technician to examine the main board for any potential failures.
| Printer Model | Epson PM-A840 |
| Error Code | 0x0 B |
| Display On | PRINTER |
| Description and troubleshooting | CR LOAD POSITION excess speed error. The CR motor rotates faster than expected during printing. CR encoder failure. Tooth skip or improper tension of the timing belt. Motor driver failure. Main board failure. |
Key reset Epson PM-A840
– Epson PM-A840 Resetter For Windows: Download
– Epson PM-A840 Resetter For MAC: Download
Check Supported Functions For Epson PM-A840
If Epson PM-A840 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson PM-A840 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson PM-A840
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
