Epson PX-K150 Error 0xC4
Epson PX-K150 Error code 0xC4, commonly displayed on printers, indicates an ink device error or ink cartridge failure. This error message can also signify failures in the holder board assembly (such as CSIC or contact failure), main board, cable, or FFC disconnection.
When encountering this error, troubleshooting steps can be undertaken to identify and rectify the issue. Firstly, ensure that the ink cartridges installed in the printer are properly inserted and securely seated. If any of the cartridges are empty or low on ink, replace them with genuine Epson cartridges. It is crucial to use authentic cartridges to avoid compatibility issues and ensure optimal printer performance.
If the cartridges are correctly installed, the next step is to check the holder board assembly. Inspect for any loose connections or damage to the CSIC (Contact Image Sensor) or contact points between the cartridges and the holder board. Carefully clean these contact points with a lint-free cloth or cotton swab dipped in isopropyl alcohol.
In some cases, the error may stem from a problem with the main board. To address this, restarting the printer can be attempted. Turn off the printer, unplug the power cable, wait for a few minutes, and then reconnect the power cable and turn the printer back on.
If the error persists after these troubleshooting steps, it is recommended to contact an authorized Epson service center for further assistance. They possess the expertise and resources to diagnose and repair complex hardware issues, ensuring the smooth functioning of your Epson PX-K150 printer.
| Printer Model | Epson PX-K150 |
| Error Code | 0xC4 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson PX-K150
– Epson PX-K150 Resetter For Windows: Download
– Epson PX-K150 Resetter For MAC: Download
Check Supported Functions For Epson PX-K150
If Epson PX-K150 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson PX-K150 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson PX-K150
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
