Epson PX-S5080 Error 0x80F2
The Epson PX-S5080 printer may encounter an error code 0x80F2, which manifests as a display message on the printer. This error refers to a CSIC (Contact Image Sensor Controller) access issue. There are several possible causes for this error, including a disconnected or broken FFC (Flexible Flat Cable), failure of the CSIC terminal or CR (Carriage Return) contact module, or even a malfunctioning main board.
When the FFC is disconnected or broken, it hampers communication between the CSIC and other printer components. This disconnection or damage must be rectified by reattaching or replacing the FFC as required. On the other hand, failure of the CSIC terminal or CR contact module disrupts the data flow to and from the CSIC. In this case, repairing or replacing the affected component will likely resolve the problem.
In more severe cases, the main board may be the underlying cause of the error code. If this is the situation, professional assistance may be necessary to diagnose and repair the main board or replace it if needed.
To troubleshoot the error code 0x80F2 on the Epson PX-S5080 printer, it is recommended to first check the FFC connections and ensure they are securely attached. If any damage is noticed, replacing the FFC should be considered. Additionally, inspecting the CSIC terminal and CR contact module for potential issues is advised. If no visible problems are detected, contacting a printer technician for further assistance is recommended.
It is important to note that attempting any repairs or replacements should be done cautiously and, if unsure, seeking professional guidance is always a wise choice to avoid further complications.
| Printer Model | Epson PX-S5080 |
| Error Code | 0x80F2 |
| Display On | PRINTER |
| Description and troubleshooting | CSIC access error. Disconnected or broken FFC. Failure of the CSIC terminal/CR contact module. Main board failure. |
Key reset Epson PX-S5080
– Epson PX-S5080 Resetter For Windows: Download
– Epson PX-S5080 Resetter For MAC: Download
Check Supported Functions For Epson PX-S5080
If Epson PX-S5080 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson PX-S5080 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson PX-S5080
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
