Epson RX580 Error 0xB8
The Epson RX580 Error code 0xB8 that is displayed on the printer indicates an ink device error. This error might occur due to several reasons, including ink cartridge failure, failure of the holder board assembly (CSIC or contact), main board failure, or cable or FFC disconnection.
One of the common causes of this error is an ink cartridge failure. It could be due to a faulty or incompatible cartridge. In such cases, it is recommended to remove the cartridge and reinstall it properly. If the problem persists, consider replacing the cartridge with a new, genuine one.
Another possible cause is a failure in the holder board assembly, which could be related to the CSIC (Ink Cartridge Chip) or contact failure. In this scenario, check if the CSIC contacts are clean and properly connected. Clean them gently with a lint-free cloth if necessary. If the problem persists, it is advisable to contact Epson support or a professional technician for further assistance.
Main board failure could also result in this error. To address this issue, power off the printer and unplug it from the electrical outlet. Wait for a few minutes before plugging it back in and powering it on. If the error persists, seeking help from Epson’s customer support or a professional technician might be required.
Lastly, a cable or FFC (Flexible Flat Cable) disconnection might cause the error code 0xB8 to appear. Ensure that all cables and FFCs are securely connected to their respective ports. If any cable or FFC appears damaged or loose, it should be replaced or securely reconnected.
It’s crucial to remember that troubleshooting steps may vary depending on the specific printer model and individual circumstances. If these troubleshooting steps do not resolve the issue, it is always recommended to reach out to Epson’s customer support for further assistance.
| Printer Model | Epson RX580 |
| Error Code | 0xB8 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson RX580
– Epson RX580 Resetter For Windows: Download
– Epson RX580 Resetter For MAC: Download
Check Supported Functions For Epson RX580
If Epson RX580 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson RX580 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson RX580
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
