Epson SC-P400 Error 0xC6
The Epson SC-P400 Error code 0xC6 is an issue that can occur when using the printer. This error is specifically related to an ink device error, ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable/FFC disconnection.
When this error is displayed on the printer, it indicates that there is a problem with the ink system. It could be due to a faulty ink cartridge, a malfunctioning holder board assembly, or a problem with the printer’s main board. Additionally, it may be caused by a loose or disconnected cable or FFC (Flexible Flat Cable).
To troubleshoot the issue, there are several steps you can follow. First, check if any of the ink cartridges are empty or improperly installed. Ensure that they are securely inserted into their respective slots. If the cartridges are low on ink, replace them with new ones.
If the ink cartridges are properly installed and not empty, you can try reseating the holder board assembly. Turn off the printer and unplug it from the power source. Open the printer cover and gently remove and reinsert the holder board assembly.
If the issue persists, it may be necessary to examine the printer’s main board. In this case, it is recommended to contact Epson customer support for further assistance. They will be able to guide you through the troubleshooting process or arrange for a repair if needed.
In summary, the Epson SC-P400 Error code 0xC6 indicates an ink device error. This error could be due to various factors such as ink cartridge failure, holder board assembly failure, main board failure, or cable/FFC disconnection. By following the troubleshooting steps mentioned above, you can resolve the issue and continue using your printer efficiently.
| Printer Model | Epson SC-P400 |
| Error Code | 0xC6 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson SC-P400
– Epson SC-P400 Resetter For Windows: Download
– Epson SC-P400 Resetter For MAC: Download
Check Supported Functions For Epson SC-P400
If Epson SC-P400 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson SC-P400 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson SC-P400
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
