Epson SC-PX7VII Error OxF1
The Epson SC-PX7VII is a high-quality printer that occasionally encounters error code OxF1 on its display. This error is usually associated with several possible issues, including PF PID excess load error, encoder failure, PF motor failure, PF Mechanism overload, cable or FFC disconnection, tooth skip or improper tension of the timing belt, motor driver failure, or main board failure.
The PF PID excess load error usually occurs when the paper feed (PF) mechanism experiences an unusually high load. This can be caused by too much paper being fed into the printer at once or a jam in the paper path. To troubleshoot this issue, try removing any jammed paper and ensure that the paper feed mechanism is clear.
Encoder failure is another possible cause of error OxF1. The encoder is responsible for controlling the movement of the printer carriage. If it fails, the printer may display this error. To address this issue, check for any obstructions or debris around the encoder strip and clean it if necessary.
If the PF motor or mechanism is experiencing an overload, it can trigger the OxF1 error. In this case, check for any physical obstructions or blockages in the paper feed path and clear them if necessary.
Cable or FFC disconnection can also cause the OxF1 error. Ensure that all cables and flat flexible connectors (FFCs) are securely connected to avoid any disconnections.
If the timing belt is improperly tensioned or skipped a tooth, it could lead to an OxF1 error. Inspect the belt and adjust its tension if necessary.
Motor driver failure is another potential cause. If the motor driver circuit is faulty, it may need to be replaced to resolve the issue.
Finally, if all else fails, a main board failure could be the culprit. In this case, it is recommended to contact Epson customer support for further assistance.
| Printer Model | Epson SC-PX7VII |
| Error Code | OxF1 |
| Display On | PRINTER |
| Description and troubleshooting | PF PID excess load error. Encoder failure. PF motor failure. PF Mechanism overload. Cable or FFC disconnection. Tooth skip or improper tension of the timing belt. Cable or FFC disconnection. Motor driver failure. Main board failure. |
Key reset Epson SC-PX7VII
– Epson SC-PX7VII Resetter For Windows: Download
– Epson SC-PX7VII Resetter For MAC: Download
Check Supported Functions For Epson SC-PX7VII
If Epson SC-PX7VII In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson SC-PX7VII is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson SC-PX7VII
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
