Epson SX400-SX405-SX409 Error 0xB8
The Epson SX400-SX405-SX409 is a popular printer model known for its reliability and high-quality prints. However, at times users may encounter an error code 0xB8 displayed on the printer. This error is related to ink device failure, ink cartridge failure, holder board assembly failure, main board failure, or cable or FFC disconnection.
One common cause of this error is an ink device failure, which indicates a problem with the ink system. This can be resolved by ensuring that the ink cartridges are properly installed and that there are no blockages in the ink tubes. Cleaning the printhead and running a nozzle check can also help solve this issue.
Another cause of the error is an ink cartridge failure. In this case, it is recommended to replace the affected cartridge with a genuine Epson ink cartridge. Using third-party cartridges or refilling cartridges may cause compatibility issues leading to this error.
If the error persists, it could indicate a failure in the holder board assembly, specifically the CSIC (Cartridge Chip Information System) or a contact failure. This requires professional assistance from Epson service centers to diagnose and repair the printer.
In some instances, the main board of the printer may be faulty, leading to the error code 0xB8. In such cases, it is advised to contact Epson customer support for further guidance.
Lastly, a cable or FFC (Flexible Flat Cable) disconnection can also trigger this error. Ensure that all cables and FFCs are securely connected and not damaged. If a cable is found to be loose or damaged, it may need to be replaced.
In conclusion, encountering the error code 0xB8 on the Epson SX400-SX405-SX409 printer can be frustrating. However, by following these troubleshooting steps and seeking professional help if needed, users can overcome this issue and resume their printing tasks seamlessly.
| Printer Model | Epson SX400-SX405-SX409 |
| Error Code | 0xB8 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson SX400-SX405-SX409
– Epson SX400-SX405-SX409 Resetter For Windows: Download
– Epson SX400-SX405-SX409 Resetter For MAC: Download
Check Supported Functions For Epson SX400-SX405-SX409
If Epson SX400-SX405-SX409 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson SX400-SX405-SX409 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson SX400-SX405-SX409
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
