Epson T25 Error OxFC
Epson T25 Error Code OxFC Display on Printer: Description and Troubleshooting
When dealing with the Epson T25 printer, encountering error code OxFC can be frustrating. This error often indicates an issue related to the PF Load Position on your printer. It could be due to various factors such as encoder failure, PF motor failure, PF mechanism overload, cable or FFC disconnection.
Firstly, the encoder failure can occur when there is a problem with the sensor that detects the position of the PF Load. This can be resolved by cleaning the encoder strip gently with a lint-free cloth. Ensure there are no obstructions or dirt on the strip, as these can interfere with the sensor’s reading.
Secondly, PF motor failure might be the cause of the error. If this is the case, try restarting the printer. Sometimes, power cycling can resolve temporary motor malfunctions. If the problem persists, it is advisable to contact Epson support for further assistance and potentially arrange for a motor replacement.
Another potential cause is PF mechanism overload. This issue can be resolved by ensuring that the paper tray is not overloaded with excessive sheets of paper. Adjust the paper stack appropriately and make sure it is within the printer’s recommended capacity.
Lastly, a cable or FFC (Flexible Flat Cable) disconnection could trigger the error. Inspect the cables connected to the PF Load Position sensor and the control board. If you find any loose or disconnected cables, securely reconnect them.
In conclusion, if your Epson T25 printer displays the OxFC error code, it signifies a problem with the PF Load Position. By following the troubleshooting steps mentioned above, such as cleaning the encoder strip, power cycling, checking for paper overload, and inspecting the cables, you can potentially resolve the issue. However, if the problem persists, it is advisable to seek assistance from Epson’s support team to ensure a proper resolution.
| Printer Model | Epson T25 |
| Error Code | OxFC |
| Display On | PRINTER |
| Description and troubleshooting | PF LOAD POSITION excess judgment error. Encoder failure. PF motor failure. PF Mechanism overload. Cable or FFC disconnection. |
Key reset Epson T25
– Epson T25 Resetter For Windows: Download
– Epson T25 Resetter For MAC: Download
Check Supported Functions For Epson T25
If Epson T25 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson T25 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson T25
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
