Epson T33 Error OxC5
Epson T33 OxC5 Error Code Display on Printer: Description and Troubleshooting for Ink Device Error
If your Epson printer is displaying the OxC5 error code, it is indicating an ink device error. This error can occur due to various reasons, including ink cartridge failure, holder board assembly failure (such as CSIC or contact failure), main board failure, or even cable or FFC disconnection.
One possible cause of the error is an ink cartridge failure. Check if the ink cartridges are correctly installed and make sure they are not empty. If they are low on ink, replace them with new cartridges of the correct model.
Another cause of the error could be a failure in the holder board assembly, specifically the CSIC or contact. The CSIC is responsible for communicating with the printer about ink levels. Inspect the contacts on both the cartridge and the printer for any dirt or damage. Clean them carefully using a lint-free cloth and ensure proper alignment when reinstalling the cartridge.
A main board failure can also trigger this error code. In such cases, it is recommended to contact Epson support for assistance. They will guide you through further troubleshooting steps or advise on the repair options.
Lastly, the error may be due to a cable or FFC (Flexible Flat Cable) disconnection. Check all the cables and connections between the printer components. If any cable appears loose or disconnected, firmly reattach it.
Remember, before attempting any troubleshooting steps, it is advisable to turn off the printer, unplug it from the power source, and wait for a few minutes before plugging it back in and turning it on again.
If the issue persists, contacting Epson customer support is the best course of action for professional assistance in resolving the OxC5 error code and getting your printer back to its normal functionality.
| Printer Model | Epson T33 |
| Error Code | OxC5 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson T33
– Epson T33 Resetter For Windows: Download
– Epson T33 Resetter For MAC: Download
Check Supported Functions For Epson T33
If Epson T33 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson T33 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson T33
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
