Epson WF-2520-2521-2528 Error 0xF2
The Epson WF-2520-2521-2528 printer may encounter an error code 0xF2, which is displayed as “PF PID excess speed error.” This error indicates that the PF (Paper Feed) motor is rotating at a higher speed than expected. This issue could occur due to various reasons, including encoder failure, tooth skip, improper tension of the timing belt, motor driver failure, or even a failure in the main board.
One possible cause of this error is an encoder failure. The encoder is a device that helps the printer accurately track the position of various components. If the encoder malfunctions, it can lead to incorrect feedback about the motor’s speed to the printer, resulting in the error code 0xF2.
Another cause could be tooth skip or improper tension of the timing belt. The timing belt is responsible for coordinating the movement of the printer’s mechanical components. If the belt is skipping teeth or has incorrect tension, it can cause the PF motor to rotate at an excessive speed, triggering the error code.
Motor driver failure is another potential reason for this error. The motor driver is responsible for regulating the motor’s speed and controlling its movements. If the motor driver malfunctions, it may cause the motor to rotate at an unexpected speed, resulting in the error code 0xF2.
In some cases, a failure in the main board of the printer could also trigger this error code. The main board is the central component that controls the printer’s functions. If the main board is faulty, it may send incorrect signals to the motor, leading to the excess speed error.
To troubleshoot this error, it is recommended to power off the printer and disconnect it from the power source for a few minutes. This process may reset the printer, and if the error was caused by a temporary glitch, it should resolve the issue. However, if the error persists, it is advisable to contact Epson customer support for further assistance, as professional repair may be required to resolve the underlying hardware issue.
| Printer Model | Epson WF-2520-2521-2528 |
| Error Code | 0xF2 |
| Display On | PRINTER |
| Description and troubleshooting | PF PID excess speed error. The PF motor rotates faster than expected. Encoder failure. Tooth skip or improper tension of the timing belt. Motor driver failure. Main board failure. |
Key reset Epson WF-2520-2521-2528
– Epson WF-2520-2521-2528 Resetter For Windows: Download
– Epson WF-2520-2521-2528 Resetter For MAC: Download
Check Supported Functions For Epson WF-2520-2521-2528
If Epson WF-2520-2521-2528 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WF-2520-2521-2528 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WF-2520-2521-2528
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
