Epson WF-2830-2831-2835 Error 0x02BD
The Epson WF-2830-2831-2835 printer may display error code 0x02BD on its screen, indicating an issue with the printer’s EJ2 PID excess load. This error message suggests that the EJ2 motor has stopped running in the middle of a print operation.
There are several possible reasons for this error to occur. The first is the presence of obstacles such as jammed paper, which can prevent the EJ2 motor from functioning properly. Additionally, an overload of the paper feed mechanism can also lead to the motor’s halt. Disengaging or breakage of the gears can further contribute to the motor’s failure to operate smoothly.
In some cases, the error may be caused by the printer’s inability to read the EJ2 motor encoder. This can happen if the timing belt becomes frayed or jumps out of place. Contamination of the EJ2 encoder scale can also result in the error message being displayed. Another possible cause is the disconnection, breakage, skew, or damage of the EJ2 motor cable or encoder FFC.
It is also worth considering that the EJ2 motor may not be completely broken, but it is experiencing some level of failure. Similarly, the main board of the printer may also be faulty, resulting in this error code being displayed.
To troubleshoot this error, it is recommended to first check for any obstacles or paper jams in the printer. Clearing these obstructions should be the first step. If the issue persists, it may be necessary to inspect the gears and timing belt for any damage or misalignment. Cleaning the EJ2 encoder scale may also help resolve the problem. If all else fails, it is advised to contact Epson customer support for further assistance or seek professional repair services.
| Printer Model | Epson WF-2830-2831-2835 |
| Error Code | 0x02BD |
| Display On | PRINTER |
| Description and troubleshooting | EJ2 PID excess load error. The EJ2 motor stopped running in the middle of the operation. The EJ2 was stopped by Obstacles such as jammed paper Overload of the paper feed mechanism Disengaging or breakage of the gears. Failed to read The EJ2 motor encoder. The timing belt become frayed or jumping. Contamination of The EJ2 encoder scale. Disconnection, break, skew or damage of The EJ2 motor cable/encoder FFC. Failure of The EJ2 motor (not completely broken). Failure of the main board. |
Key reset Epson WF-2830-2831-2835
– Epson WF-2830-2831-2835 Resetter For Windows: Download
– Epson WF-2830-2831-2835 Resetter For MAC: Download
Check Supported Functions For Epson WF-2830-2831-2835
If Epson WF-2830-2831-2835 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WF-2830-2831-2835 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WF-2830-2831-2835
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
