Epson WF-5290 Error 0x0071
The Epson WF-5290 is a high-quality printer that may encounter error code 0x0071, prompting the display to show an error message. This error is related to the I/S load position, indicating a reverse error in the printer’s operation. It typically occurs when there is a failure in the I/S motor, causing the ink system to stop functioning.
The error code may also be triggered by various other issues within the printer. These include mechanism overload, a broken gear, encoder failure, a contaminated encoder scale, a disconnected or broken FFC (Flexible Flat Cable), an encoder sensor failure, or even a main board failure.
Troubleshooting the error code 0x0071 requires a few steps. Firstly, it is recommended to power off the printer and disconnect it from the power source. Leave it as is for a few minutes before plugging it back in and powering it on again. Sometimes, a simple power cycle can resolve the error.
If the error persists, it is advised to check for any visible signs of damage, such as broken gears or disconnected cables. Cleaning the encoder scale with a lint-free cloth can also remove any contamination that may be affecting its function. In case the issue remains unresolved, seeking professional assistance or contacting Epson support is the next course of action, as it may indicate a more serious problem like a failed component that requires replacement or repair.
By following the troubleshooting steps and addressing the potential causes mentioned above, users can hopefully resolve the Epson WF-5290 error code 0x0071 and restore their printer’s functionality.
| Printer Model | Epson WF-5290 |
| Error Code | 0x0071 |
| Display On | PRINTER |
| Description and troubleshooting | I/S LOAD POSITION reverse error. Operation failure of the I/S motor. The ink system was stopped. Mechanism overload. Broken gear. Encoder failure. Contaminated encoder scale. Disconnected or broken FFC. Encoder sensor failure. Main board failure. |
Key reset Epson WF-5290
– Epson WF-5290 Resetter For Windows: Download
– Epson WF-5290 Resetter For MAC: Download
Check Supported Functions For Epson WF-5290
If Epson WF-5290 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WF-5290 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WF-5290
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
