Epson WF-7621 Error Code 0xB1 Part 16317

Epson WF-7621 Error 0xB1

Epson WF-7621 Error 0xB1

Epson WF-7621 Error code 0xB1 is a common issue that may occur while using the printer. This error is typically accompanied by a message on the printer display indicating an ink device error, ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable/FFC disconnection.

When encountering this error, it is essential to follow some troubleshooting steps to resolve the issue. Here are a few recommendations:

1. Restart the Printer: First, turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in. Turn on the printer and check if the error still persists.

2. Check Ink Cartridges: Open the printer cover and ensure that the ink cartridges are properly installed. If any of them appear to be empty or damaged, replace them with genuine Epson ink cartridges.

3. Clean Contacts: Ink cartridge contacts can accumulate dirt or debris, leading to poor connection. Take out the cartridges and gently clean the metal contacts with a soft, lint-free cloth. Reinsert the cartridges properly.

4. Check Holder Board Assembly: Examine the holder board assembly for any visible damage or loose connections. If necessary, consider replacing the assembly after consulting with an authorized service center.

5. Seek Professional Help: If the error persists even after following the above steps, it is advisable to contact Epson customer support or a certified technician. They will provide you with appropriate guidance or arrange for a repair if required.

Remember, it is crucial to use genuine Epson products and follow the recommended procedures to ensure the optimal performance and longevity of your printer.

# You are thumbing through Fix Epson WF-7621 Error 0xB1 at za.chiplessprinter.com
Printer Model Epson WF-7621
Error Code 0xB1
Display On PRINTER
Description and troubleshooting Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection.
| Extend your reading list: https://za.chiplessprinter.com/epson-pm-g4500-error-code-oxee-part-3574/

Key reset Epson WF-7621

– Epson WF-7621 Resetter For Windows: Download
– Epson WF-7621 Resetter For MAC: Download

Check Supported Functions For Epson WF-7621

If Epson WF-7621 In Supported List

Get Wicreset Key

Epson WF-7621 Wicreset Key

– After checking the functions that can be supported by the Wicreset software, if Epson WF-7621 is supported, we will reset the waste ink as shown in the video below:

Contact Support For Epson WF-7621

Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

Share This Post

Post Comment