Epson WF-7715 Error 0x02BD
The Epson WF-7715 printer is a highly efficient and reliable machine that is designed to provide excellent printing results. However, like any other electronic device, it is prone to occasional errors and issues. One such error is the 0x02BD error code, which is accompanied by the message “EJ2 PID excess load error.”
This error occurs when the EJ2 motor, responsible for driving the printer’s operations, stops running in the middle of a task. There can be several reasons behind this issue. Some common causes include obstacles such as jammed paper, overload of the paper feed mechanism, or disengaging/breakage of the gears. Another possible cause is a failure to read the EJ2 motor encoder, which is responsible for accurate positioning of the motor.
Other factors that may contribute to this error are a frayed or jumping timing belt, contamination of the EJ2 encoder scale, or disconnection/breakage/damage of the EJ2 motor cable/encoder FFC. In rare cases, the EJ2 motor itself may be faulty, although not completely broken. Additionally, a failure of the main board can also lead to this error.
To troubleshoot this issue, it is recommended to follow these steps:
1. Check for any jammed paper or foreign objects obstructing the printer’s operation.
2. Inspect the paper feed mechanism for any signs of overload or damage.
3. Examine the gears for any disengagement or breakage.
4. Clean the EJ2 encoder scale to remove any contaminants.
5. Ensure that the EJ2 motor cable/encoder FFC is properly connected and undamaged.
6. If possible, try replacing the EJ2 motor with a new one.
7. If none of the above steps resolve the issue, consider consulting a professional technician to check for a possible failure of the main board.
By following these troubleshooting steps, you should be able to resolve the EJ2 PID excess load error on your Epson WF-7715 printer and resume your printing tasks efficiently.
| Printer Model | Epson WF-7715 |
| Error Code | 0x02BD |
| Display On | PRINTER |
| Description and troubleshooting | EJ2 PID excess load error. The EJ2 motor stopped running in the middle of the operation. The EJ2 was stopped by Obstacles such as jammed paper Overload of the paper feed mechanism Disengaging or breakage of the gears. Failed to read The EJ2 motor encoder. The timing belt become frayed or jumping. Contamination of The EJ2 encoder scale. Disconnection, break, skew or damage of The EJ2 motor cable/encoder FFC. Failure of The EJ2 motor (not completely broken). Failure of the main board. |
Key reset Epson WF-7715
– Epson WF-7715 Resetter For Windows: Download
– Epson WF-7715 Resetter For MAC: Download
Check Supported Functions For Epson WF-7715
If Epson WF-7715 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WF-7715 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WF-7715
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
