Epson WF-7828 Error 0x005C
The Epson WF-7828 printer is a highly efficient and reliable printing device. However, users may encounter an error code 0x005C displayed on the printer. This error indicates an issue with the ASF (Automatic Sheet Feeder) load position excess speed, encoder error, contaminated encoder scale, disconnected or broken FFC (Flexible Flat Cable), encoder sensor failure, motor driver failure, or even a main board failure.
One possible cause of this error is a problem with the ASF load position excess speed. This occurs when the paper loading mechanism operates at a speed beyond its threshold. To resolve this, make sure the paper is properly loaded in the paper tray without overloading it. Additionally, check for any obstructions or debris that might be interfering with the movement of the paper feed mechanism.
Another potential cause is an encoder error. The encoder is responsible for accurately determining the paper position within the printer. If the encoder scale is contaminated or dirty, it can affect its functionality. Clean the encoder scale gently using a soft cloth or cotton swab to remove any dirt or debris.
A disconnected or broken FFC can also trigger this error. Ensure that all connections between the FFC and the printer are secure and undamaged. If necessary, replace the FFC to restore proper functioning.
If the issue persists, it could be due to a failure in the encoder sensor, motor driver, or even the main board of the printer. In such cases, it is advisable to contact Epson customer support or bring the printer to an authorized service center for further assistance and potential repairs.
In conclusion, the Epson WF-7828 error code 0x005C can stem from various causes, including excessive speed, encoder issues, or hardware failure. By following the troubleshooting steps mentioned above, you can address these problems and ensure smooth printing operations again.
| Printer Model | Epson WF-7828 |
| Error Code | 0x005C |
| Display On | PRINTER |
| Description and troubleshooting | ASF (2nd) load position excess speed error. Encoder error. Contaminated encoder scale. Disconnected or broken FFC. Encoder sensor failure. Motor driver failure. Main board failure. |
Key reset Epson WF-7828
– Epson WF-7828 Resetter For Windows: Download
– Epson WF-7828 Resetter For MAC: Download
Check Supported Functions For Epson WF-7828
If Epson WF-7828 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WF-7828 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WF-7828
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
