Epson WorkForce-600 Error 0xB9
The Epson WorkForce-600 printer is an efficient and reliable device that aids in day-to-day printing needs. However, at times, users may encounter an error code 0xB9 displayed on the printer, indicating an ink device error. There are several possible causes for this issue, including ink cartridge failure, holder board assembly failure, main board failure, or cable and FFC (Flexible Flat Cable) disconnection.
The most common reason behind the error code 0xB9 is an ink cartridge failure. To troubleshoot this problem, start by ensuring that the ink cartridges are properly installed and have sufficient ink. If any of the cartridges are low on ink or nearing expiry, replacing them might resolve the issue. Additionally, check for any leaks or clogs in the ink cartridges that could be affecting the printer’s performance.
Another potential cause could be a failure in the holder board assembly, specifically with the CSIC (Contact Sensor Image Chip) or contact. To address this problem, try cleaning the contacts on both the printer and the cartridges and reseating them securely. If the issue persists, it may require professional assistance or a replacement of the holder board assembly.
More severe issues like a main board failure or cable/FFC disconnection may also trigger the error code 0xB9. In such cases, it is advisable to contact Epson customer support or an authorized service center for further guidance and potential repairs.
In conclusion, the Epson WorkForce-600 error code 0xB9 is typically associated with ink device errors, cartridge failures, board assembly issues, or cable disconnection. By following the troubleshooting steps mentioned above, users can attempt to resolve the problem themselves. However, if the error persists, it is recommended to seek professional help for an appropriate solution.
| Printer Model | Epson WorkForce-600 |
| Error Code | 0xB9 |
| Display On | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
Key reset Epson WorkForce-600
– Epson WorkForce-600 Resetter For Windows: Download
– Epson WorkForce-600 Resetter For MAC: Download
Check Supported Functions For Epson WorkForce-600
If Epson WorkForce-600 In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson WorkForce-600 is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson WorkForce-600
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
