Epson WP-4545 Error Code OxCF Part 5387

Epson WP-4545 Error OxCF

Epson WP-4545 Error OxCF

The Epson WP-4545 printer is a popular choice for both home and office use. However, like any electronic device, it can encounter errors that disrupt its performance. One such error is the OxCF error code, which may be displayed on the printer’s screen. This error typically indicates an ink device problem, specifically an ink cartridge failure.

There are a few possible causes for this error. One potential issue is a failure with the holder board assembly, specifically with the CSIC (Cartridge Safety Interlock Circuit) or contact failure. This means that the printer is unable to establish proper communication with the ink cartridges.

Another possible cause is a failure in the printer’s main board. The main board is responsible for controlling various functions of the printer, including ink cartridge detection. A failure in this component can lead to the OxCF error code.

Additionally, the error may be caused by a disconnection in the cable or FFC (Flexible Flat Cable). If the cable connecting the ink device to the printer becomes loose or disconnected, it can trigger the error.

To troubleshoot the OxCF error, there are a few steps you can take. First, try removing and reinserting the ink cartridges to ensure they are properly seated. If the error persists, check for any visible damage or loose connections in the printer’s holder board assembly and main board. If necessary, you may need to replace these components.

It is also advisable to check the cable or FFC connections to ensure they are secure. Reconnecting any loose cables can often resolve the issue.

If none of these troubleshooting steps resolve the issue, it is recommended to seek assistance from an Epson service center or contact Epson customer support for further guidance.

# You are reviewing with attention Fix Epson WP-4545 Error OxCF at za.chiplessprinter.com
Printer Model Epson WP-4545
Error Code OxCF
Display On PRINTER
Description and troubleshooting Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection.
| Check out the continuation: https://za.chiplessprinter.com/epson-et-3710-error-code-0x80ed-part-50085/

Key reset Epson WP-4545

– Epson WP-4545 Resetter For Windows: Download
– Epson WP-4545 Resetter For MAC: Download

Check Supported Functions For Epson WP-4545

If Epson WP-4545 In Supported List

Get Wicreset Key

Epson WP-4545 Wicreset Key

– After checking the functions that can be supported by the Wicreset software, if Epson WP-4545 is supported, we will reset the waste ink as shown in the video below:

Contact Support For Epson WP-4545

Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

Share This Post

Post Comment