Epson EW-M571T Error 0x02AC
Epson EW-M571T Error code 0x02AC Display on PRINTER: RASF PID Lock Error
If you encounter the error code 0x02AC on your Epson EW-M571T printer, it indicates a problem with the RASF (Rear Auto Sheet Feeder) PID lock. This error occurs when the RASF motor fails to run due to various reasons.
There are several possible causes for this error. One possibility is an overload of the mechanism, which can occur due to excessive paper load or a paper jam. Another potential cause is disengagement or breakage of the gears responsible for the RASF motor’s movement. It is also possible that the printer failed to read the RASF encoder, resulting in this error. Contamination of the RASF encoder scale or breakage, skew, or damage of the RASF motor cable/encoder FFC can also lead to this issue. Additionally, the RASF encoder sensor may have malfunctioned or the RASF motor itself may be faulty, with a broken lead wire or disconnected connector. Finally, a failure of the main board could also be the cause of the error.
To troubleshoot this error, there are a few steps you can take. Firstly, ensure that the paper load is within the printer’s specified limits and check for any paper jams. Clear any paper obstructions that may be causing an overload. Inspect the gears and cables for any signs of damage or disengagement. Clean the RASF encoder scale carefully to remove any contaminants. You may also want to unplug and reconnect the connectors and cables associated with the RASF motor and encoder. If these steps do not resolve the issue, it is recommended to contact Epson support or a qualified technician for further assistance.
In conclusion, if you are encountering the Epson EW-M571T Error code 0x02AC on your printer, it is likely related to a problem with the RASF PID lock. Following the troubleshooting steps mentioned above can help you identify and resolve the issue.
| Printer Model | Epson EW-M571T |
| Error Code | 0x02AC |
| Display On | PRINTER |
| Description and troubleshooting | RASF PID lock error. The RASF motor did not run. Overload of the mechanism. Disengaging or breakage of the gears. Failed to read the RASF encoder. Contamination of the RASF encoder scale. Break, skew or damage of the RASF motor cable/encoder FFC. Failure of the RASF encoder sensor. Failure of the RASF motor (the lead wire is broken or the connector is disconnected). Failure of the main board. |
Key reset Epson EW-M571T
– Epson EW-M571T Resetter For Windows: Download
– Epson EW-M571T Resetter For MAC: Download
Check Supported Functions For Epson EW-M571T
If Epson EW-M571T In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson EW-M571T is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson EW-M571T
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
