Epson TX810FW Error 0x19
The Epson TX810FW printer may encounter an error code 0x19 with the message “ASF LOAD POSITION excess speed error” displayed on the printer’s screen. This error can be caused by several reasons, including encoder failure, gear engagement failure, tooth skip of the ASF gears, tooth skip or improper tension of the timing belt, or even main board failure.
To troubleshoot this error, you can try several steps. Firstly, ensure that there are no foreign objects or obstructions hindering the movement of the ASF gears or timing belt. If there are any, remove them carefully. Additionally, check if the encoder strip is clean and free from any dust or dirt. If required, gently clean it using a lint-free cloth.
Another troubleshooting step is to power off the printer and disconnect it from the power source. Wait for a few minutes, then reconnect the printer and power it on again. This can reset the internal settings and potentially resolve minor issues.
In case the error persists, it may be necessary to contact Epson customer support or a qualified technician. They can provide further guidance or assist in repairing or replacing any faulty components, such as the encoder or main board.
It is essential to note that attempting any repairs or component replacements on your own may void the printer’s warranty. Therefore, it is advisable to seek professional assistance to ensure the issue is resolved effectively and without causing any further damage to the printer.
| Printer Model | Epson TX810FW |
| Error Code | 0x19 |
| Display On | PRINTER |
| Description and troubleshooting | ASF LOAD POSITION excess speed error. Encoder failure. Gear engagement failure. Tooth skip of the ASF gears. Tooth skip or improper tension of the timing belt. Main board failure. |
Key reset Epson TX810FW
– Epson TX810FW Resetter For Windows: Download
– Epson TX810FW Resetter For MAC: Download
Check Supported Functions For Epson TX810FW
If Epson TX810FW In Supported List
Get Wicreset Key
– After checking the functions that can be supported by the Wicreset software, if Epson TX810FW is supported, we will reset the waste ink as shown in the video below:
Contact Support For Epson TX810FW
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
